Tool Caddy - Prusa i3 MK2

thingiverse

This is a tool caddy for the Prusa provided tools in the Original Prusa i3 MK2(S) kits. This caddy allows easy storage and access to your tools for making adjustments/repairs as needed. Placement for the tool caddy is in the corner above the Rambo housing. There are now 2 versions of the Tool Caddy: The original version allows the allen wrenches to go all the way through the caddy. This can cause an issue in very rare situations with the longer 2.5mm allen when the X axis is at 0 and the Z axis is above 200. The 2nd version limits the allen wrenches depth in the Tool Caddy and staggers the allen wrenches. This resolves the very rare times that are described above. I have also moved the needle nose slot closer to the corner edge. Note: After printing this in various configurations, I have determined that the best way to print is in the orientation that it will attach to the frame. So this means supports would be needed in this orientation. When you slice it, I recommend using the option to only use the base for supports. This will move the supports on the overhand that holds it to the frame away from the lower locking ledge. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: .20 Infill: 20% Notes: The STL file should already be aligned the way it should be printed. Recommended first layer is the logo side down. Custom Section Update 1: Reduced the lower ledge bump. The original was a bit too large and was very difficult to snap in to place Update 2: Found out the Needle Nose Pliers slot had too thin of walls. I increased it to a 2mm wall and increased the size to better accomodate the pliers. Also added another ridge to better support the top part of the caddy.