Tooned Birdhouse - The shack!

cults3d

NOTE: COPYRIGHT PA1© - SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS: https://www.patreon.com/PA1_MAKER Yep! Another birdhouse to my collection! Unfortunately, not all birds have the same budgets. And just like in the real world, some are less fortunate than others and live in a more rustic way... So here's this little rustic cabin, "the makeshift shack" of our feathered friend, which will protect him from the dangers of nature. -All parts already placed in the right orientation -Multi-parts design, so no need for paint. -Will fit any 220 x 220 bed or bigger -Easy to print, optimized for a 0.4 nozzle with a 0.3 layer height for faster prints -Instructions with exploded views -Almost support free, only one part needs supports and its not on a visible area. Its the entrance, because of the positive texture on it. Talking about the entrance, you have three sizes included depending on which bird you wanna attract. This print unfortunately will not fit a Prusa mini, but you still have the option to scale it down and redrill screw holes. But for an optimum result, the design was made for an Ender 3/Prusa mk3s bed size. I have tested all part with a 0.3 layer height for maximum print speed. Everything prints fine and you can use this layer height to maximise your printing process. But a 0.2 layer height will also work fine, except being longer to print. Use at least 3 walls. I recommand 4 walls at least for the support. An infill of 15% is recommended. You don't need more honestly. All parts are alreay in the right orientation. Pictures and instruction are in the zip file! You will need: (8x) m3 x 6mm screws (2x) m3 x 16mm screws (4x) m4 x 12mm screws Have fun! Post your print on social media pages!!! You have no idea how much its helpful for me!!!! ;)