Toothbrush holder “bubbles”

**A beautiful toothbrush holder with a unscrewable bottom for easy cleaning.**
Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

I always had trouble keeping my toothbrush holder clean. Even putting it in the dishwasher did not result in a clean, hygienic cup. That's why I designed a holder that allows you to simply unscrew the bottom and clean it more easily. This way you get a more hygienic result with less effort.

Size assembled ca: 80 x 80 x 100 mm
This is the V4
Photos by Maison Lumiere

**Print settings**
Required build volume: 100x100x100 mm
Material usage: 90g
Print time: 7h

Material: PLA
Print direction: stls are rotated correctly, check images (yes the body is printed upside down due to the threads)
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none (if you have bad bed adhesion consider using a brim for the body since it is printed upside down)

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.