Top Cover for Lulzbot A0-100 RAMPS 1.4 Cover

prusaprinters

<p>This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this yet, so if anyone does before I get a chance, please let me know if it works and or what I should do differently next time.</p> <h3>Print instructions</h3><h3>Category: 3D Printer Parts Summary</h3> <p>This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this yet, so if anyone does before I get a chance, please let me know if it works and or what I should do differently next time.</p> <h3> Instructions</h3> <p>I took the STL files for the base Lulzbot from here: <a href="http://download.lulzbot.com/AO-100/hardware/printed_parts/stl/">http://download.lulzbot.com/AO-100/hardware/printed\_parts/stl/</a> Converted it to Autodesk inventor using their STL to solid thingy, then built a top that seems to look like it might work.</p> <p>Use the Ramps_mount4.stl file. It's now the correct size, and flipped on the correct side.</p> <p>You'll need two fairly long bolts with nuts for the cover itself, a 40mm fan (I have no idea where it plugs in) and 4 shorter bolts and nuts for the fan. I found I had to clearance around the microSD card to make it fit. My RAMPS board also apperently has a reset switch of some sort near the fan, you may also have to notch around that. Everything else seems to fit fine.</p>