Tower of Hanoi Travel Game

thingiverse

Take your Tower of Hanoi game with you on the go. This is the latest iteration of a travel version, using "Pop Hinges" found in Tinkercad (https://tinkercad.com/things/3zGKBKNeTf3) to give very nice flexibility in the housing. The folding box serves to keep the discs safe when moving and also it can be inverted to form a stand for the game. The Pop Hinge on the outer edges allows it to be locked in closed or standing positions. Instructions Tower was printed in PLA at Low Resolution (0.3 mm) with 10% infill (2 shells). Extruder temp was 215C and speeds were 75mm/sec wile extruding and 125 mm/sec while travelling. Print time was 1hr 30 min. Discs were printed in PLA at high resolution, 50% infill. Print time was 20 min. Assembly: Connecting the Pop Hinge parts took firm pressure. Lay one part on a table and place the second hinge on it at a 90 degree angle. Slowly rock the standing hinge back and forth (about 20-30 degrees each way) until it works its way together. Be patient and careful to avoid breaking the towers off. Once connected, the hinges are very secure.