Trailer Plug Holder Adapter

prusaprinters

<p>If you converted your trailer from a 7-pin to a 13-pin plug, you might have encountered the problem, that the new plug is bigger and therefor doesn't fit in the holder anymore.</p><p>With this print you can adapt the hole to an endcap, so you always have a place to put the plug without having it hanging on the ground.</p><p>For this you need two parts: The Adapter and the Screw.</p><p>Because access is limited the screw has a slot for a flat head screwdriver and the adapter has a hole so you can srew it in from the front.</p><p>The Endcap can be screwed on with three M3 screws. You will need so drill a drainage hole in the middle of the endcap.&nbsp;</p><p><strong>Printing:</strong></p><p>The threaded sections should be printed in 0.1mm Layer hight, the rest can be printed in 0.25mm.</p><p>The Adapter should be placed with the circular face on the printbed, as the threads need to be printed upright. Therefore you need supports for this part.</p>