Transformers Modern Icons Helmet Stand

prusaprinters

<p>A simple helmet stand designed to work with the Modern Icons Transformers replica helmets. Currently being used with Optimus Prime and Megatron helmets. The main component of the stand includes threads and a base piece that can screw together to add weights for more stability. However, I haven't had any issue with stability with just the plastic by itself.&nbsp;</p><p>Print the Base Bottom and Base Main with supports if you want to use the threads, as they're greater than 45 degree angles. You can print the Base Main by itself without supports if you don't want to use the Base Bottom and your printer can bridge longer distances. The Stand Horizontal might need to be rotated to fit smaller printer beds correctly. It can print without supports, but adding them will help the sockets print smoother for the connector pieces. The Top and Connector can be printed without supports. Brim shouldn't be needed, but might help with the Base Main and Base Bottom if you experience warping.</p><p>Print two Connectors, one for the top and bottom of the Stand piece. Glue together if you don't think the friction fit is strong enough. Once assembled you should be able to find the center spot of the helmets for the stand to balance on.</p>