transmission for 200 belts and stronger bottom 5mm hole

thingiverse

I was not finding any "flexible" remix for a 180-200mm belts in way to use both with a bit of tollerance, so i started mixing the original. Than, after some pain i realized that the original design had some disilignement, so i remixed more parts, top ones and bottom, with the transmission again, the rod was always bented cause of slight disilignement with the top part, same was happening with belt, the bottom part were much closer to the frame. -I have still not printed it yet, thats why its Work In Progress. -U will still need to refer to the original guidlines. -My parts are not compatible with the originals cause of different measures. -I strongly sugest u to use metal spacers, im usng washers in pair with some nuts, if u has none or u cannot be sure they will be same H i post modded spacers with bigger touch surface. - I also remixed the motor mount, the original is still ok but with mine u can just put the bolt inside and the nut outside, in the iriginal version its tricky to achieve. - if u previosly printed my cable chain u will find the right arm compatible with it, and the chain adapter. - i included the not remixed parts, so u can just download everything in one time: the clamp and the tensioner block are original. -The Rail Cover is just a 10 cm part tha perfectly fits in to the v-rail slots to ensure the cable inside - Transmission Straight is the same transmission but at different angle, the original was giving me some troubles with the cable chain because its invading its living space on max height There is no more gap for screw the motor pulley, to me is a one time usefull all time weak point. the pulley is something u mount once and kinda forever. the creator guide suggest to mount it after the 80t one, u can do the same thing in reverse order with the same result, i left that gap. printed mine with: - 4 layers top bottom and 4 walls - 0,2mm layer h. and a standard 0,4 walls. - 5mm cubic infil. I suggest u to use the original creator printing settings to be safe(5L top/bot, 5 walls). Since there is a wall on bottom side also u will need to mount the transmission part w/o the motor first to have access to inner screws. -The orignal creator is doing a very great job, his web page is something new to 3d printing, support him by downloading some files from his links. Happy printing