Tray for tilt-down drawers
prusaprinters
<p>Required Hardware: </p><ul><li>a pair of specific hinges such as: <a href="https://www.amazon.de/-/en/Rev-Shelf-LD-0220-50SC-Close-Hinges/dp/B018A36II6">https://www.amazon.de/-/en/Rev-Shelf-LD-0220-50SC-Close-Hinges/dp/B018A36II6</a></li><li>6mm thick board for the back and bottom of the tray</li></ul><p>There are 2 different sizes:</p><ul><li>the small one: 15cm tall / 8cm deep</li><li>the big one: 15cm tall / 12cm deep</li></ul><p>FreeCAD file is also attached so that you can adjust to your cabinet/sink/panel sizes.</p><p>The mounting system is rather sub-optimal; screwing the second side is really painful and requires some 90° angle-drill adapter or manual screwing… for me this was too late, do not hesitate to remix.</p><p>Print settings: white PLA, 0,2mm, infill 20%, no support.</p>
With this file you will be able to print Tray for tilt-down drawers with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tray for tilt-down drawers.