Triangular Bladeless Fan

thingiverse

# TRIANGULAR BLADELESS FAN # #!!! I AM REVIEWING THE DESIGN #AND THUS REMOVED THE # DOWNLOADABLE FILES TEMPORARILY !!! A unique triangular design of the popular bladeless fan. The "bladeless" design uses an airfoil shape to suck and capture additional air, thus increasing overall air-flow and cooling. <b> Triangle 120mm.STL and STAND 120mm.STL have been updated to provide better airflow. I am currently working on a hairdryer fan compatible version. (See provided pictures for detailed component and design views) <b>The project requires a couple of other components: - 92mm or 120mm computer fan <b>(120mm recommended as the smaller fan does not provide enough airflow), A high end fan is also better as they provide more airflow, less blow-back and quieter operation. - Power Supply (12V DC dependent on fan) - On/Off switch (optional) - Double sided tape,Cable ties or 4 x M4 nuts & bolts (To mount the fan onto the stands inner supports) - Glue gun (Make sure to seal holes and connections to prevent air from escaping) <b>The following print settings are recommended: * TRIANGLE 120mm.STL Layer Height: 0.2 Infill: 30% (Grid) Supports: Yes (everywhere) Bed Adhesion: No * TRIANGLE DUCT 120mm & 92mm.STL Layer Height: 0.2 Infill: 30% (Grid) Supports: Yes (everywhere) Bed Adhesion: Brim * STAND 120mm.STL Layer Height: 0.2 - 0.28 Infill: 45% (Grid) Supports: Yes (touching building plate) Bed Adhesion: Brim (The total print time is around 40 hours) <b> Please leave a like or comment ( :