Trike Accessory Mount - Trip Computer, Head Light Catrike

thingiverse

Update, Dec 30, 2019 Okay, I finally have a working setup with a new modified Head Light mount that the pedals clear and is working great for me. New photos of the part and how I have things mounted can be seen. Update, Jan 7, 2020 I posted a new design. So far it seems to be better than this one. Here is a link if you care to have a look. https://www.thingiverse.com/thing:4087130 This is an adapter post for 25 to 26mm tubing. It allows more room for mounting phone, computer and other accessories. I use this for my phone mount and head light assembly. This is an easy print. It can be printed with supports off of bedplate. I also use a brim to allow enough surface area for the print to stick. I used a .6mm nozzle and 2.0mm shell. I used 20% infill which seems to be enough. I used PETG to print this. I'm sure PLA would work as well. There are two STL files. The yellow one requires (in photo) requires the cap to be cut from the finished print. I did this to allow simpler printing. The red side mount cap STL doesn't need any cut. UPDATE Dec 31,2019: I added a separate cap and straight piece files if someone wishes to print separate and not have to cut the original. The straight piece may require a support. I managed without on my printer however. I set these up to except a 4mm screw to secure the cap to the other half. I drilled the hole slightly larger to except the screw on the one half and the 4mm screw will thread directly into the other half. This is a firm connection. No nut is needed.