Triple Fan Holder for Delta Printer

thingiverse

This is a triple fan holder for delta printer. Two part coolers and one main cooler for E3D v6 compatible hotend. Designed specifically to hold the fans strictly under the effector bounds as to maximize the travel area near the towers for each axis. It is possible to print without support, just orient the left and right parts to lay on their back and the base on its front. Parts are exported oriented correctly to print without support. Assembly: Fix the main fan on the base_part using 4 x M3-15mm screws to the base holder, then fit the base and fan to the hotend. You can use longer M3 screw to fix firmly the base and effector from the top (depending on the effector you use). Then prepare side holders for mounting. Fix the fan using 2 x M3-15mm using the right column of holes for the 'left_part' holder. Fix the other fan using 2 x M3-15mm using the left column of holes for the 'right_part' holder. Mount both holders with the base using 2 x M3-20mm using the left and right columns for each holder respectively. Print using PETG or ABS. You will need 3 x 30x30x10 fans 4 x M3x15mm screw for base fan 2 x M3x15mm and 2 x M3x20mm for each of the side fans. I'm sharing the fully customizable design at Tinkercard so you can fit to your specific effector more easily. https://www.tinkercad.com/things/boDnR1qTqMB