Tripod Mobile Phone Clamp V2

prusaprinters

<p>This update is based on <a href="https://www.thingiverse.com/thing:3500945">Gavitka's</a> remix of the updated original <a href="https://www.thingiverse.com/thing:2194278">Modular Mounting System</a>.</p><p>This is a remix of the clamp of the <a href="https://www.thingiverse.com/thing:2194278">Modular Mounting System</a>. I really like the clamp but I wanted to be able to mount it on a tripod. So I add a base that can be screwed on tripod plate (with 1/4-20 screw) or mount on arca swiss type clamp. I separate threads so they can be printed with optimal orientation without support. This way the threads are very well printed and they are strong.</p><p>Use some acetone if you print with PLA or ABS (or some super glue, depending the filament material) before inserting the thread part into the main part.</p><p>11/03/2021 Update.&nbsp;</p><p>I made a small change at the base to fit better on arca swiss type clamps. Also I added files with bigger jaws for thicker phones or phones with cases (look for the files with the word thicker).</p><p>15/02/2022 Update</p><p>I made a small hole to the knurled head and the two screw pieces. Now you can secure them with a piece of filament if you wish.</p>