Tritium umbrella like logo cufflinks

prusaprinters

<p>This is my first design. Should be used on multimaterial, where transparent red one is designed for tritium rods or can be printed with glowing filament. Also possible to print separately and glue parts together. Now it is designed that it should be printable with no supports.</p> <h3>Print instructions</h3><p>I believe that best result will be 0,4 nozzle and 0,15 layer in quality settings(or smaller for better details) on multimaterial printer(but there are also models for separate parts which can be glued together) where main body will be done with dark grey fillament and four parts of the logo with transparent red carmine fillament where are the holes where you can insert white tritium rods from this link <a href="https://www.aliexpress.com/item/32824819244.html?spm=a2g0o.productlist.0.0.744472e43TyVam&amp;algo_pvid=1df86ba1-84e2-4d7c-a769-92cf1916ba81&amp;algo_expid=1df86ba1-84e2-4d7c-a769-92cf1916ba81-14&amp;btsid=2100bddd16049372608405569eb918&amp;ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_">https://www.aliexpress.com/item/32824819244.html?spm=a2g0o.productlist.0.0.744472e43TyVam&amp;algo_pvid=1df86ba1-84e2-4d7c-a769-92cf1916ba81&amp;algo_expid=1df86ba1-84e2-4d7c-a769-92cf1916ba81-14&amp;btsid=2100bddd16049372608405569eb918&amp;ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_</a><br/> Holes will probably need redrill or adjust the diameter of holes in the model(from 1,5 to 1,6). The point is to have the cufflinks with glowing ubrella like logo. It should be also easy to remix this to the ring or pendant. I don´t own any 3D printer I just have the possibility to work with Prusa Mini in work and I love it. I just test to print it with one material and it needed to make some upgrades of the rod, which was too loose. Now is the rod upgraded and it will hold together much better. Specially with 100% infill. But 15% is also enough.</p>