Tronxy P802 series Z axis riser (UPDATED!!)

thingiverse

This kit requires physical modifications to fit, including widening holes. Do not expect it to be bolt-on ready. This is an updated version of the Z-axis risers I posted earlier. Using this set, I achieved a full 240mm height and 250mm with some coaxing required. The only issue may arise with the motor top file, which is not mine and has measurements that require physical modification to fit properly. I would personally use a form of Z wobble stopper instead for this purpose. The right Z-frame is widened to accommodate a second generic extruder motor from eBay. You will need 8 x 34-35mm M3 screws to attach the motor to its mount. The files used are listed here rather than as remixes: Upper Z frame: http://www.thingiverse.com/thing:1633668 Motor mount (measurements off) Unable to locate listing at this time. Wobble Stopper: http://www.thingiverse.com/thing:2144143 UPDATE 5/20/2017: Just finished installing 400mm threaded rods and 400mm smooth Z-rods, eliminating the need for modding the Z-motor mounts. I used standard-pitch threaded rods (not sure of the pitch but the same as OEM rods just 400mm long from eBay) and 5/16 steel rods sourced locally at 3ft. Easily obtained both rods from this length. Have fun.