TronXY X5 upgrade kit

thingiverse

Up Grade Kit , these parts plus a couple of bits of aluminium can be used to :- Add a second Z axis to stabilise the bed, Carry all components inside the perimeter of the frame allowing the frame to be encased easily Lift all the wires above the carriage for easy routing through an over head tank track. Spread out the bearings on the z axis slider to give more rigidity from the 8mm guide rods. --------------------------------------------------------------------------------------------------------------------- Please note this kit is designed to flip the Z axis upside down, so either the plugs need flipping over or the wire's need to be swapped around, to reverse the stepper motors. encasing the unit will mean the process will keep the steppers warm. its best to build in an extraction system to cool it down and pull smells out of the cabinet. I'm working up to running ABS so I intend to use HEPA filtration. I used a ream to finish the guide rod holes and bearing sleeves I probably went massively over board with the t-slot screws top and bottom of the Z-axis ......but it works so hey