TronXY X5SA PRO Direct Drive Mount MODIFIED
thingiverse
Low rider version of the STOCK mount requires a lot of permanent modification to the printer. To do this mod you must dismantle the hotend carriage or make the cuts while its still mounted (Not recommended) Modification requirements: -I used a Dremal to cut off the top and bottom parts of the metal backplate (Bottom not required just weight reduction since its not used) -I removed all cabling from the chain and bundled it up in a wire wrap (search "wire cable wrapping" on amazon) with zip ties around bowden tube as support to create an arch. As with the stock mod your retraction settings and esteps will need to be updated. Here are my current settings your mileage may differ. Retraction 0.6mm @35mm/s Linear Advance K is 0.09 (Oops. This is the DDv1 value) ESteps 410 Titan Assembly: https://e3d-online.dozuki.com/Guide/1.75mm+Bowden+Titan+Assembly/20?lang=en
With this file you will be able to print TronXY X5SA PRO Direct Drive Mount MODIFIED with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on TronXY X5SA PRO Direct Drive Mount MODIFIED.