TRX-4 Hobbywing 1080 Mount with Lever Switch

prusaprinters

<p>When I upgraded my TRX-4 ESC to a Hobbywing 1080, I found several mounting plates, but none had an external lever switch like I had been using with the original Traxxas ESC.</p> <p>I've combined Puredeath's excellent TRX switch(<a href="https://www.thingiverse.com/thing:2486727">https://www.thingiverse.com/thing:2486727</a>) with a basic 1080 mount by silverbullet126 (<a href="https://www.thingiverse.com/thing:3668792">https://www.thingiverse.com/thing:3668792</a>) .<br/> I personally prefer the longer rocker level by NetMagi (<a href="https://www.thingiverse.com/thing:2568104">https://www.thingiverse.com/thing:2568104</a>), so I have remixed both it and the original Puredeath one to fit the 1080 mount.</p> <p>In addition to combining the parts, modified the tray to better fit trucks with the 2-speed servo installed, and added holes around the base for tie wraps.</p> <p>The switch height is set assuming the button is mounted using the foam tape that comes with the ESC.</p> <h3>Print instructions</h3><h3>Category: R/C Vehicles Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Notes:</strong></p> <p>I find that the levers fit best when printed with supports and oriented shown in the included slicer screen shot.</p> <p>My main print is in PETG and the switch was printed in PLA, but any filaments should work.</p>