TT02 Drift steering

thingiverse

This is my TT02 Drift steering mod.ths is desinged for metal axsles wich the cup cut off. you can dut off the standart plastic axles but you´ll need to grind the diameter os the remaining cup down till it runs free. There 5 different Arms with different lengths (+-1mm, +-0.5mm and Straight), you can change the the Toe in/out an fullsteering by choosing different holes at the steering arms. The MK2 Arms are adjustable.assemble like on the pictures. drill all holes 3mm exept the hole for the (stock) Servo connector on the Steering arms and the 5 holes for the ball mount on the Steering arms. those holles should be drilled 2.5mm. to get the arms running smooth on the balls you should mount on of the balls at the threads in a drill (put nus on it the prevent damade of the thread) an drill those ams till the run smooth. oil at the end helps too. the 2 shorter screws are used to mount the steering arm reinforcement. the ball on the knuckle is secured with a nut. you´ll need following extra materials: 6 M3x20 2 M3x6 6 M3 nuts 4 M3 Tamiya ball studs (the same as the ones for the shocks) for MK2: 2 M3 nuts 2M3x18