TubeBoss - Oxygen Tube Management Device

cults3d

A device used to manage the placement of, but not limited to, oxygen tubing which is in need of being anchored at a specific location but also requiring temporary relocation. The device consists of two parts: a base and a clip, each embedded with a magnet (8x3mm base, 6x2mm clip). The clip and the base connect together and act as a single unit when the clip is brought into close proximity of the base; a result of the forces exerted by the embedded magnets. The clip can be separated from the base by using enough force to overcome the magnetic pull. The base is designed to be attached to the floor, wall, or another surface. It can be attached using screws, double-sided tape, or other adhesive means. The clip is designed to be placed over the tubing and remain on the tubing throughout usage. The fit is such that the clip maybe relocated on the tubing by sliding the tubing through the clip. In addition to the two part design, a unit of one piece design is also available. This unit is designed for use where separation and relocation are not required. This design was created after watching my sister and brother-in-law struggle with running oxygen tubing throughout their house. This design can also be used as a cable management solution.