Turbo Racing 1/76 Mini RC Race Track Barrier
An assortment of connectable track barriers for mini RC vehicles, I sized these for Turbo Racing 1/76 RC cars. Would also work well with Kyosho DNano or Sturmkind Dr!ft. Remixed from Meistro's excellent little single barrier piece. I reduced the height to reduce printing time & filament as you need a lot of pieces to make a full track, and then made all the shapes and lengths I needed to use my small floorspace to maximum effect. The two tracks shown have approximate widths of 20cm for the larger one and 15cm for the smaller one, both are driveable with overtaking possible with the 1/76 Turbo Racing cars Printed on - GeeeTech i3 Layer Height - 0.4mm Supports - No Infill - 10% Walls - 3 Material - PLA The parts click together and apart easily either directly into each other or can be slotted together from the top. they are a tight fit so an impact from the small Turbo Racing cars does not make the track shape bend and they stay in the same shape.
With this file you will be able to print Turbo Racing 1/76 Mini RC Race Track Barrier with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Turbo Racing 1/76 Mini RC Race Track Barrier.