Turning Handle for Table Saw

prusaprinters

<p>Replacement handle for a Ryobo table saw, or other handles mounted to shafts.</p><p>8.75mm shaft protrudes from the table saw, and this drives a screw to wind up the height of the blade. &nbsp;This should suit most applications with a similar shaft size and a flattened shaft section that is within 15mm of the end of the shaft</p><p>Requires a 10mm face-face M6 bolt to be slotted in to the top of the print, and an M6 bolt of at least 30mm length to bolt it to the shaft.</p><p>No supports required, I have printed this in ABS and PETG with no issues.</p><p>Recommended infill is 20%, with 100% in the area around the nut to prevent it from cracking if overtightened.</p><p>If it's a little tight for the shaft you can print at 101% with no issues, but I found it to fit perfectly as is with a little spray of lube on the shaft :p</p><p>I haven't put much effort into cleaning up the fusion file, if anyone needs a modification to it though please feel free to ask:), feedback is welcome!</p><p>&nbsp;</p><p>I've used the part many times since printing with no issues.</p><p>&nbsp;</p>