Housing for RAMBo mini 1.3A

thingiverse

I recently bought my original Prusa i3. I like the printer a lot except for a few things: the flimsy housing for the RAMBo mini 1.3A card. I also would like to observe the RAMBo from the side of the printer so I turned is 180 degrees with the parts pinting outward. The way the cables enter the original housing looks weird. I repositioned and created holes to put cables and cable covers in/through. My case needs 20 screws (+4 for the Rambo) so you need 12 additional screws (you already have some), the same M3 x 10 as provided with the original 'housing' [Updated 31-10-2015] I've moved holes for screws to open the housing more easy [Updated 2-11-2015] 3 minor mistakes fixed: I made 3 minor mistakes in bottom, back and left plate. Back plate was missing a screw hole for connecting the bottom plate The bottom plate didn't fit very well to the back plate because of 1 mm overlap where it shouldn't be Bottom plate didn't fit well on the left plate, small gap of 1 mm [Update 10-11-2015] Status 'This Thing is a Work-In-Progress' removed. The case works fine for me and my original Prusa i3 Print Settings Rafts: No Supports: Yes Resolution: .2 layer height Infill: 50 Notes: I printed with ABS at 255 degrees.nozzle and 110 degrees heat bed Some parts need to be rotated before printing! Because of the shrinkage, I had to print at 101% to get the actual sizes right!