Twisted 6-sided Vase Basic on a tray

thingiverse

I scaled up the original design and printed it three times, each one a different size: one 100mm tall, one 125mm tall, and one 150mm tall. I designed a tray to hold them, then added some stones for weight and fake flowers for decoration. MaakMijnIdee uploaded the vases on Thingiverse (https://www.thingiverse.com/thing:18672). A timelapse of printing the small vase is available on YouTube (https://www.youtube.com/watch?v=wnnvH9SvOjw). The print settings for all three vases were as follows: * Spiral vase mode * 4 bottom layers * 4 top layers * Wall thickness: 1 layer, 0.4mm in my case * Temperature extruder: 195°C * Bed type: 3mm glass * Temperature bed: 60°C * Infill: none * Material: PLA (black) * Layer height: 0.2mm * Adhesion: none * Support: none * Software: Cura 3.4.1 * Print speed: 45mm/s For the tray, I used these settings: * Temperature extruder: 200°C * Bed type: 3mm glass * Temperature bed: 65°C * Infill: none * Material: PLA (black) * Layer height: 0.2mm * Adhesion: none * Support: yes * Software: Cura 3.4.1 * Print speed: 45mm/s