uBitX Case for PLA

prusaprinters

<p>This is a remix of John's excellent uBitX case designed for PET, which you can find here:</p> <p><a href="https://www.thingiverse.com/thing:2732866">https://www.thingiverse.com/thing:2732866</a></p> <p>Changes include:</p> <p>Closures using 3mm self tapping screws, instead of clamshell style latches.</p> <p>Clearances for fitting parts and through holes made slightly looser, to accommodate the stiffness of the PLA.</p> <p>I have included a link to the original posting, you can get the custom knobs and microphone holder from there.</p> <p>I also added an alternative case back, with an additional hole to accommodate a 13mm round fuse holder.</p> <p>Thanks to John for graciously sharing his Fusion 360 project to allow this remix.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Robo 3D</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>R1 ABS + PLA Model</p></div> <p><strong>Rafts:</strong></p> <p>Yes</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>30%</p></div> <p><strong>Notes:</strong></p> <p>If you print the custom knobs in PLA, try increasing the size in your slicer by 5 - 10% for an easier fit.</p> </p></p></p> Category: Electronics