Ultimaker 2 LED Fix

thingiverse

• Project finished, there are no planned updates. When necessary, then Use these two little fittings to hold the LED strips in the inner front-corners a little bit better. *** Information regarding enhancements and bug fixes you will find in the "Comment" section. Please come back again after the download, print, and testing, and leave some feedback. Based on your comments I can try to make things better. Photos with the already assembled object does not show the latest design. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.1mm Infill: 33% Instructions All 3D objects created with SketchUpMake. / All Materials usable...This parts printed with: Ultimaker PLA BlueTR / Layer: 0.1mm / Infill: 33 Percent / Temp: 210 Degree / Speed: 35mm/s. If the fittings for some reason do not fit exactly, then please do not force it. Use the Scale function of Cura in the Object Preview to slightly adjust the objects in their size. •PLEASE print all items with identical settings. •WARNING: Avoid PLA printing with insufficient infill (less than 33%) in combination with temperatures below 205 degrees. Objects with fine static structures can be very unstable due to poor Layer-Adhesion. Incorrect retraction settings, such as for example too long or too fast retractions can cause big problems in an object with small static elements. •PLEASE use a special printing surface, so your objects get almost smooth and mate base areas, also lower platform temperatures are possible. •PLEASE use the glas printing surface, so your objects get almost glossy base areas. •DIRECT PRINTING ON GLASS: High risk of material Warping and complete detachment from the glass surface, especially for very large objects and insufficient build platform temperatures less than 60 degrees. An excessive build platform temperature higher than 70 degrees, can cause object deformations and dimensional inaccuracies mainly in areas near the glass surface.