Ultimate Jurassic Park Gate (Textured)

thingiverse

Added textures to the brilliant model made by Drussell19: https://www.thingiverse.com/Drussell19/about No post processing involved, just glue the parts together and you will have the result in the cover photo! Mine is sized to 170% which works well for an Ender 3. ***Depending on the scale you print this at, drop the pillars and gates down into the buildplate a few mm to ensure a flat base and good plate adhesion** Print the following: 1 X GATES.stl in a wood like colour 1 X Textured Pillar.stl (Within a .rar due to size) in a stone colour 1 X SIGN.stl in a stone colour, changing filament colour to yellow and red at the desired height (SIGN STL.gcode is pre-sliced at 170% with filament changes for an Ender 3 but any bowden extruder printer with a similar sized build plate should work) 2 X flame_large.stl in orange 6 x flame_small.stl in orange 2 X torchholdertop.stl in stone 6 x torchholder.stl in stone