under sink siphon drawer mod - ikea maximera

thingiverse

(Model need small correction) I used an standard depth maximera drawer for under the sink, and needed to make space for the siphon, This piece will cover the cut area and join the rear of the drawer (not highly important, as it is also screwed to the base board. Objective is that the part is pretty sturdy, but not hugely material demanding, and nice looking for sure :) Dimensions are pretty minimum for ikea siphon, and I did first the cut, then a colleague dimension the part accordingly. Space for base board require re-dimensioning (height is is 0.4mm too small) There are two holes for selftaping screws on the back. I'll replace them as right now they are just on the edge of the metal back of the drawer, and with 2 perimeters there is not much material for the thread, should print 3 perimeters at least there. They are not really needed, but is nicer with them :)