UniFi G3 Flex edge mount

prusaprinters

<p>I needed an edge mount for my UniFi G3 Flex.<br/> Found nothing fitting.</p> <p>So I designed my own.<br/> OpenSCAD file included for changes.</p> <p>And I added my 3mf project file. Inside the 3mf I added some infill modifiers for the holes for better stability.</p> <p>The four large holes fits for 3,5 x 35 screws.<br/> The two small holes have a diameter of 2mm. You should use selftapping screws here. I uses 2,5 x 10mm screws.</p> <p>I might add a second version which has unequal cathetus. But you can create it easily with the scad file yourself if needed. For now I am happy with this version I printed.</p> <h3>Print instructions</h3><p>Printed in PETG with 0.2 settings and 15% infill.</p> <p>Modifier parts have 100% infill (applies only for .3mf file)</p> <p>Print time was ~ 3h on my MK3s with 0.2 Quality settings and the above mentioned modifications for the infill.</p>