Universal adjustable nozzle cam

prusaprinters

<p>Universal nozzle cam should be able to be used with any aftermarket fan duct that has a 40 mm fan open for easy access such as the hero me or the one I'm using Satsana 5015. I would recommend using a higher temperature resistant filament such as petg, abs or nylon since it's going to be kind of close to the hotend. Hardware that will be needed x2 20mm M3 bolts and 2x nuts for part A to put in the up 2 40mm fan holes, 1x 30mm M5 bolt for to &nbsp;connect part A and Part B together with with 1x M5 nut, 1x 20mm M5 bolt and nut &nbsp;to connect Part B to part C either the five or seven mm version, 1x 10mm M3 for locking in the Endoscope in place. The clearances are pretty tight so you may have to do a little bit of drilling if your printer isn't had its extruder calibrated. I use a little wrench that comes with my printer for the M5 nuts and that worked fine for me but you could use a knob nut if its easier for you and in one of the pictures I have &nbsp;showing the recommended orientation to have them into print. part B has a train so you can adjust I don't know the exact angle but it looks to be a close to about 120. &nbsp;Also I would recommend doing a couple of tests Prints with the nozzle can before starting a long print to make sure that the nozzle camps not whacking into any prints this my first upload hope you guys like it happy printing!!</p>