*Updated* Enhancements for RecRoomMasters 32" Pro Upright Xtension Arcade

thingiverse

These are some enhancements to the RecRoomMasters.com 32" Pro Upright Xtension Arcade. They should be printed in a semi-flex material like TPU or similar. Sorry, I noticed after upload that some will need to be rotated for printing (fixed this for paired parts, see update #2). The first item is a bumper for the sharp corners on the rear of the control panel. I was always nervous about one of the 3-7 year old crowd scratching an eye on this sharp corner. I printed these at 10% infill, with enough top and bottom layers to make the top solid (I used 4 bottom, 4 top with .2mm layers). The file should be mirrored to complete the pair (fixed, see update #2). The second object is a wedge to completely secure the X-Arcade Tankstick into position. Two should be printed and wedged in behind the Tankstick. I printed these with pretty high infill, maybe 50%. The third and fourth objects are a channel that fits right underneath the Plexiglass to keep it from flexing. Three of the long ones will be needed, along with two of the short ones. Also high infill with these. *Update: I have now added a fifth object which blocks the light leak coming from behind the monitor near the top. I printed in TPU, with supports. I also mirrored in my slicer before I printed the second one for the other side but really it probably doesn't matter. (fixed, see Update #2) *Update #2: Now there are separate files with the pairs already made. They have been mirrored as needed and now are positioned ready to print.