UPDATED: Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter

thingiverse

UPDATED: (1/21/20): newly uploaded files incorporate a two piece design that requires no support with your choice of two bottom sections, one narrow and one wide. The two pieces thread together after printing. Bottom sections are interchangeable. The wide bottom has ridges to catch the gripping rubber pieces that are in many large cup holders, keeping this adapter from coming out accidentally. Use just the bottom of the wide version with or without the top piece. This makes it less likely that you will spill your beverage as it keeps the rubber pieces inside your car's cup holders from holding too tightly to your normal size travel mugs and paper coffee cups. Bengal512 (https://www.thingiverse.com/Bengal512/about) cut the top out of one of the large holes to make room for a coffee mug handle, I have incorporated this innovation. Print in ABS and smooth with acetone for the strongest, longest lasting results. UPDATED: (6/21/2016): updated design to REVi. Now compatible with Contigo 16 ounce, Kleen Kanteen 16 ounce and all the above listed Hydro Flasks. Original description for the one piece that matches the dimensions of the updated two piece narrow version: Nearly all Hydro Flasks fit securely with this thing. This adapter precisely fits the 32 and 40 ounce stainless steel Hydro Flask bottles in its major ID. All other sizes* of Hydro Flask (see update notes regarding Klean Kanteen and Contigo) fit in the next smaller step down, also a precise, secure fit. except the 64 ounce wide, True Pint (now fits the wide two piece from the 1/21/20 update) and the two food sizes This photo from the company's FAQ shows the : https://d3oco3p7h2m8kx.cloudfront.net/skin/frontend/hydroflask/default/images/HF-Product-Size-Chart-for-Web.png The bottom remains open such that most paper cups (and the Hydro Flask True Pint) will fit while this adapter remains in your car's standard cup holder. Solidworks (2016), STL and Parasolid models are all included (only stl files for the 1/21/20 update). Print Settings Printer Brand: Afinia Printer: AFINIA H480 Rafts: Yes Supports: Yes Resolution: 0.25mm Infill: doesn't matter Notes: Print in ABS with the small end down (PLA shrinks in the heat of summer). Supports to the overhang will be less this direction than printing it upside down.