USB Organizer

thingiverse

Parametric USB Organizer with screw holes (on the back) to mount it on a wall. There are many models for USB holders/organizers in Thingiverse but all I cound find were in one row so I made a model with OpenSCAD and decided to share it here. This model is suitable for wall mounting. This model is a customizable model, you can use Thingiverse Customizer to customize. Body: number of rows number of columns spacing between the holes corner radius Screw holes (on the back) diameter of the screw head diameter of the screw shank/threat height of the screw head tolerance of the screw head hole. Connector size of the connector (the defaults are for USB A) tolerance of the connector hole which you can tweak so the holes aren't too tight. I have used 0.3mm which gives a snug fit. Please note - if your printer is not calibrated you should use something like 0.5. The tolerance can also be filament brand/type dependent due to shrinkage. So test it with a small piece before you print a large one. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: Normal Infill: 10% Notes: Ultimaker 2+ Settings in Cura: Nozzle: 0.4 Walls: 3 (1,05 mm) Infill: 10% Print speed: 100 mm/s Infill speed: 100 mm/s Wall speed: 50 mm/s Top/bottom speed: 20 mm/s Platform adhesion type: skirt