Utensil Rack with Magnetic Knife Holder

prusaprinters

<p>Keep your kitchen utensils off the counter top and within easy reach with this stylised rack and magnetic knife holder.</p> <h3>Print instructions</h3><p>Prints well with 0.2mm layer / 20%+ infill / PLA, PETG<br/> No Supports Required.</p> <p>Model is designed to be printed in 3 parts; the utensil block, knife block and hooks. Models have been prepared in ideal printing orientation, which is with largest flat surface on the print bed.</p> <p>The utensil block and knife block join together via alignment slots and snap clips which makes for a firm fit. The hooks simply press into the holes - try printing them in a different colour to match your kitchen highlights!</p> <p>The back of the knife block has mounting guides for dia.18.5mm magnets. These are a common size and can probably be found at your local store. With the right size the guides will hold the magnets in place, but you can also glue them in to keep them even more secure. See reference image for magnet positioning.</p> <p>Mount the assembled rack to the wall with strong double-sided tape. Each block has a flat section where the tape can be affixed. On the knife block it is located on the right side, on the utensil block it is along the bottom.<br/> *If you use 3M strips, you can align the removal tab with the edge of the flat section. There are cut-outs in the model which will keep the tab ends hidden but also make for easy access if you need to remove the rack.</p> <p>!! Be sure to check that any knives you use can be firmly held in place by the magnets. Large heavy knives may slide down and drop off if the magnet strength is too weak.</p> <p>Enjoy!</p>