V0.2 Kirigami maxwell coupling untested

thingiverse

I designed this mod specifically for the Ldo V0.2 s1 kit though it should work as long as you have the kirigami bed mount. !!!UNTESTED!!! I want to use some more stiff spacers but I'm worried about hard mounting and over constraining the bed, causing it to deform from thermal expansion. The "ball-washer" sits on the m3 threaded all and gives a flat surface to mount bed springs or the silicon tubing. Glue might be needed to hold the 3mm pins and 6mm magnets. (Please don't use hot glue) BOM: 3x M3x12/M3x14 bolts (dependent on spacer) 5x M3x6 bolts (+2 without the kirigami stealth cover) 2x M3x8 bolts (-2 without the kirigami stealth cover) 5x M3 voron spec heatset inserts (+2 without the kirigami stealth cover) 6x 6x3mm magnets (N52 preferred) 6x 3x20mm stainless steel pins (smooth) 3x M3 threaded 8mm od stainless steel balls Bed Spacer options 3x 5mm long 3mm id hard standoffs 3x 8mm long bed spings 3x 8mm long 3mm id 8mm od high temp automotive silicone tubing (same as the switchwire/prusa mod -2mm) cutting guide for 8mm tube included Don't worry about the funny guy stl https://github.com/PaulGD03/PrusaMK3_Silicone_Leveling