Valve Index Base Station Mount
thingiverse
This Valve Index Base Station Mount is designed to install the base station with its onion nut. The mount is designed to be fixed on a 30 mm aluminium profile (8 mm slot), but can actually be attached to any shelf or cabinet. The mount is fastened with three M6x16 bolts and hammerhead nuts. Virtually any screw can be used for fixing to wood as long as the appropriate washers are used - the holes of the mount are 6.2 mm wide. The upper 3D-printed Part, where u install the Basestation is connected to the lower part via a M4x20mm bolt and a M4 press fit insert (link below). If u dont have those u can glue them together as well. I printed mine in PETG, so i preffed a bolted connected over a glued one. for ABS a acetone slush glued connection will also be just fine. Printed mine in PETG 0.2mm Insert: https://www.amazon.de/Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile-Ultraschall/dp/B07YSV66Y5/ref=sr_1_1?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=m4+pressfit+insert&qid=1595354783&sr=8-1
With this file you will be able to print Valve Index Base Station Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Valve Index Base Station Mount.