Valve Index Lighthouse Wall Mount

thingiverse

This is a simple wall mount for the Valve Index lighthouses. They won't fit the Vive Pro lighthouses, but it should be easy to adjust in the Fusion 360 file. <h2>Other Materials</h2> * 2x screws to put in the wall. The screw head (+washer) thickness shouldn't exceed 3mm. Screw shaft diameter should be less than 3.8mm. * 2x M5x10 button head screws. Screw shaft length shouldn't exceed 10mm or it will stop the BaseMount from sliding on the WallPlate. * 2x M5 nuts (~4mm thick or less). <h2>Usage:</h2> * The WallPlate is mounted on the wall using two screws, the flared end in the center should be on the bottom. Washers are recommended but not necessary if you're careful. I used the anchors and screws from https://www.homedepot.com/p/E-Z-Ancor-Twist-N-Lock-50-lb-Drywall-Anchors-with-Screws-25-Pack-25200/100133106 * Mount the lighthouse base on the BaseMount using 2x M5x10 button head screws and nuts. * The BaseMount will slide onto the WallPlate.