Vanquish Hurtz Dig Micro Servo Mount
thingiverse
For use with the Vanquish Hurtz dig unit for Axial/Vanquish 3 gear transmissions and micro servo. Should also work with the $60 Amazon dig transmission, as it uses same bolt spacing for the servo mount. Due to space constraints on my rig/wanting the servo as low as possible, the micro servo sits behind the motor instead of above like some aftermarket options I've seen. I use a Castle 1406 motor and it sits flush on the back of the motor casing. Servo used is a Ecopower 827 12g high voltage micro servo, unsure of fitment with other micro servos. Recommended to use longer hardware for attaching the mount due to the thickness of it for rigidity. *****Due to the location of the micro servo, only motors with 1.95" (49.5mm) or less length will work with this mount!!*****
With this file you will be able to print Vanquish Hurtz Dig Micro Servo Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Vanquish Hurtz Dig Micro Servo Mount.