Vape Pen Holder V02-2020

thingiverse

# Vape Pen Holder V02-2020 Here's another contribution to the growing number of vape pen & accessory holders. This one is designed to hold a single vape pen no larger than 12mm. ## Remix I used the STL created by [Daedle](https://www.thingiverse.com/Daedle/about) found here at **[Tree Stump](https://www.thingiverse.com/thing:2322353)**. I used Tinkercad to modify the original STL. The original had some small *gaps* on the bottom surface so I removed the bottom 1mm of the model. I also Increased the overall height to 33mm. And adjusted the X & Y to be 44mm x 44mm Then I added a 12mm diameter cavity that begins at 3mm Z. ## Print Details **Printer:** Creality Ender 3 Pro **Filament:** Inland, PLA, Brown, 1.75mm **Temperatures:** 215C / 60C **Nozzle:** 0.4mm **Initial layer height:** 0.2mm **Layer height:** 0.12mm **Wall Thickness:** 1.6mm **Top Thickness:** 1.6mm **Bottom Thickness:** 1.6mm **Infill:** 20% cubic **Infill line multiplier:** 1 **Initial Fan Speed:** 0% **Regular Fan Speed:** 100% **Regular Fan at Layer:** 4 **Print Speed(LCD):** 100% **Adhesion:** 5mm brim **Supports:** none **Print Time:** 2 to 2.5 hours Printed on smooth glass using with a 5mm brim for adhesion. ## Finishing Post printing clean-up was done on the bottom edges with: **Deburring tool** - for removing brim remnants and finishing the edges ## Included File(s) **`vape_pen-holder-v02.stl`** - STL file ## Notes Had some under extrusion due to the fact that the spool isn't wound correctly and the filament gets caught under a previous wind.