Velcro strap wrist bracket for wearing mirrors and other gadgets

thingiverse

This is a remix of my F80 smartwatch wrist strap cradle. Someone suggested that it could be used to hold other things, like a small mirror, and that it would be nice if it could be mounted with a velcro strap, so here is a modified version that accepts a velcro strap up to 26 mm wide. Also included is an insert that fits in the cradle. You can use this as a starting point for other things that you want to make both wearable but also easily detachable from your wrist at the same time. Of course, you can just print the insert as-is, and glue or screw things onto it. If you want to use a real 26 mm wristwatch strap (like this printable one) and mount it with push pins instead of velcro, you can also print the original cradle, the shape is compatible. Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0.1 mm Infill: 25% Notes: 0.1 mm layer height is essential for everything to fit correctly. Obviously, your printer must be able to print accurately for this to work at all. For printing the cradle, see the remarks of the original thing. It is advisable to print it in upright position, although printing it flat with supports should also work, but the ridges might not be printed accurately, or be strong enough in that case. Also note: the model is created under the assumption that the ridges will be printed slightly too short, which will always be the case for an FDM printer when printing the cradle upright. Printing it in flat position (or on a perfect printer) might require you to edit the model and shrink the width of the ridges, because if you would compare the model of the insert versus the cradle, you'll notice they would collide if everything is printed 100% accurately. The insert should be an easy print. You may need to sand and chamfer the edges a bit after printing for it to fit easily into the bracket.