Velleman K8200 dual Z motor

prusaprinters

<p>Edit 12/06/19: Added Pictures of the finished solution.</p> <p>I have been looking for a great way to make the Z axel go up and down.</p> <p>I have tried a DOZEN designs and none where what I was looking for.</p> <p>Now I have designed my own one and it is in y sense the best one.</p> <p>Easy printet, stiff, easy aligned. Almost nothing can go wrong :-)</p> <p>You need to print 2 of each, but choose if you want TR8 leadscrew or SFU1204 ballscrew.</p> <p>I have designed it so that you can mount it with the motors up or down as there are monting holes in both ends.</p> <p>Or why not home to Z_max like a Prusa???</p> <p>Something that you NEED to have in mind is that the toleranses on this design is TIGHT.</p> <p>Be sure to calibrate E steps, Flow and horizontal expansion before printing this.</p> <p>When you have checked it, please do it again...</p> <p>Otherwise its just to print.</p> <p>I printed it with 80 mm/sek.</p> <p>Hope you like it and want to use it.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>K8200</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>Not impotent</p></div> <p><strong>Infill:</strong></p> <p>40% or what feels right</p> <p><strong>Filament:</strong></p> 3D Prima PLA <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Just print it like you want.</p> I printed with 0.6 nozzle, 4 perimiters and 2mm top and bottom. <p>40% Gyroid infill.</p> <p>That is rock solid now.</p> <p>Only the motor holder needs support for the bottom part, as it have some parts stiffen it up a little.</p> </div></p></p> Category: 3D Printer Parts