Vertical Charging Stand - Pebble Time
thingiverse
Fairly straight forward vertical stand for the Pebble Time, designed to allow the straps to hang downwards instead of requiring you to feed them through gaps as required in other designs. The charging cable is secured into the printed part with a small strip of 3M 03609 VHB tape. The wire easily pushes into the groove, and is also held in place with a few strips of the same VHB. I strongly recommend you pick a place for the stand and affix it there with some Command Adhesive strips between the bottom of the stand and the surface top; the weight of the stand is not sufficient to allow you to just pull the watch off. Printed on an UM2 with 0.2mm layer heights at 40 mm/s, 50% infill for structural rigidity. Support needed on the wire channel.
With this file you will be able to print Vertical Charging Stand - Pebble Time with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Vertical Charging Stand - Pebble Time.