Vesa mount plate 75x75mm fixed

prusaprinters

<p>You can use this plate to mount your monitor to a wall if the monitor supports the 75mm Vesa standard.</p> <p>How to use this:</p> <ol> <li>Print this model.</li> <li>Use the model to mark the mounting holes on the wall.</li> <li>Drill the mounting holes on the wall.</li> <li>Add countersunk screws into the holes on the wall. Use this plate to adjust them, so they are tight, but the plate should be still movable.</li> <li>Mount the plate to the back of your monitor with M4x16 countersunk screws.</li> <li>Hang the monitor onto the screws on the wall.</li> </ol> <h3>Print instructions</h3><p>Although this model is designed so that the weight of the monitor does not load the layer adhesion, I still recommend using more than usual perimeter count and more infill.</p>