VESA Raspberry PI cover with integrated fan

thingiverse

Update 2018-10-08 - I ran into some heat sinks for the processor that are just a little bit too tall, so I adjusted the height of my cover. I also added a tiny hole in the end of the cover so the "drive access" light on the PI pcb could be visible from outside the case. =============================== I really liked 0110-M-P's case, but I did not like sticking the fan on the outside of the case with the wires hanging out. So I made the case 4mm thicker and created a bracket to hold the fan inside the case There are holes for screws to mount the fan, but I have clips inside that will hold the fan in place. I also counter sunk the outside case screws for a smoother finish on the top. Use the same screws as indicated in 0110-M-P's original design to assemble it (see: https://www.thingiverse.com/thing:922740 ) I used the Easycargo Raspberry Pi Fan 30x30x7mm from amazon ( https://www.amazon.com/gp/product/B0792BW2VH ) but I would expect most any fan with the same dimensions would work. Many thanks to 0110-M-P for a fantastic design!!!