vesa wall mount 100 x 200

thingiverse

This is a tv/monitor mount easy to use make 1 wall mount bracket and exchange with eas to another mount without taking the screws out of the wall just slide it in . This was inspired by some of the available on thingiverse but they were not quite what i want , i use it for my 32" tv/monitor when i have to plug in some cables i can easily slide it out do my cabling or change the monitor/tv and slide it back in. A lot has screws and nuts to be tightened and you sometimes cannot easily access those nuts or screws to untighten them and change the overall settings of your desk/wall. i Used a iron rod of 8mm which fit perfectly i left the rod 1cm longer to have the ability to change the vesa size main bracket if that would be needed. some slight lubricant is needed. i printed in petg 0.2LH. should be fine with 0.3 too . i printed it 100% infill to make sure its robust. i made it very robust and after printing it it felt robust too , i am pretty confident it can hold my 5kg tv/monitor with eas. It is still a project in progress but i felt good to share it with you. I printed the model standing up to have the most effect out of the strength . It is a 3 part model but you could print it all in place i have a 0.2mm gap in between the hinge parts. I ended up breaking each individual hinge part and it took me a while to break it loose , printing it separate would be much less riskier cutting your self or stabbing yourself trying to break the hinge parts from each other. Finaly you could scale the vesa mount to suite your size. Please if you like the model and planned to make it please post a make https://www.thingiverse.com/thing:4594266/make I would appreciate a nice cup of coffee during modeling and it helps me a lot by supporting me. https://www.paypal.me/Vanvoorn