Victorian Rosette Block for door and window trim

thingiverse

A thin rosette block to match a particular moulding (House of Fara, Part #786). I used one of bratskbars beautiful designs for the main decoration piece. Be sure to check out the coordinating plinth block, also a remix from another of bratskbars designs. We printed it in wood filament and will stain it later. [UPDATE: see a picture of a stained one in "Makes".] https://youtu.be/0BY3bLxwZ4o Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: Scaling the rosette to be 40.00mm square and making the Z Offset -6.00mm turns it into a great quick-printing test piece for wood filament. Every printer seems to have its own “personality”, but here’s what works well on ours! FlashForge Creator Pro with the MicroSwiss All-Metal Hot End Simplify 3D settings, Hatchbox Wood Filament PLA: Extrusion Multiplier: 1.1 Extrusion Width: Manual 0.40mm Retraction Distance 7.00mm Extra Restart Distance 0.00mm Retraction Vertical Lift: 0.00mm Retraction Speed: 95.0mm Coasting Distance 0.20mm Left Extruder Temp: 200 Default Printing Speed: 70.0mm/s Outline Underspeed: 100% Solid Infill Underspeed: 100% Support Structure Underspeed: 100% X/Y Axis Movement Speed: 130.0mm/s Z Axis Movement Speed 20.0mm/s Only retract when crossing open spaces = YES Force retraction between layers = YES Minimum travel for retraction = (not checked) Perform retraction during wipe movement = (not checked) Only wipe extruder for outer-most perimeters = YES Avoid crossing outline for travel movements = (not checked)