Viltrox L116T 2020 Mount

prusaprinters

<p>This part is for mounting a Viltrox L116T LED Light Panel to 2020 Extrusions. I designed this part as I needed a way to mount the light panel to my overhead camera rig I put together out of 2020 Extruded Aluminum.</p> <p>The holes for the screw (which are for M5 Hex Cap Head) might be a little tight, but working the screw all the way down and continuing to turn the screw so it strips out the small threads it made worked the best for me. I recommend using M5x10mm, any longer and the screw will push into the 2020 Extrusion. 8mm screws will work as well, but you will have limited thread engagement.</p> <p>For the mounting of the panel, you will need the nut and screw from the original mount that came with the LED Light Panel. These are tight as well. Just press the screw through and used the screw to pull the nut into place.</p> <h3>Print instructions</h3><p>Used the default settings for 0.20 QUALITY in the PruseSlicer.</p>