VIM Handheld device enclosure

thingiverse

# VIM Handheld Case This is a custom made case design for your VIM with added support for 18650 batteries for on the go usage. The display mount is catered to support the TS050 display that is compatible with your VIM devices out of the box. To assemble you will need 6x 10-15mm M2 screws There are two variants of the model, **regular model:** holds 2 18650 cells. **NB (no battery):** can still hold 1 18650 but its the smallest version. Models consists of two parts, the body and the cover, check the images to see the most preferred way to print them, with minimal support material. **Note!:** the NB and normal version do not have the same cover plate, so make sure you download the appropriate cover!. ### Assembly: 1. Attach the display first, folding the FPC cable half way and routing the rest through the slot in the body and seating the display firmly on the display side. 2. connect the VIM to the FPC cable and seat it in the carriage. 3. Place all your power circuitry and batteries, and connect the VIN port to the device. 4. optionally add a piece of foam tape inside to hold the part steadily, and to secure the coverplate, fasten with m2 screws.