Voron 0.1 Sideswipe Probe Mount Y axis fix

thingiverse

<iframe width="560" height="315" src="https://www.youtube.com/embed/eCjvxNjo6VA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> This is a remixed part of the Voron 0.1 Sideswipe v1.5 by Christian Thomas He did a fantastic job at designing this, and is just a really cool guy in general. I didn't like the thought of either losing Y-axis volume, or not having a door panel on my Voron 0.1, but I knew I wanted to keep using the Sideswipe probe for levelling. Not one to compromise, I made this probe mount. I now have 0 loss in Y axis, and no collision with the door. The mount sits very close to the heater block but I haven't noticed any warping yet even after longer prints, I use a silicone sock which probably helps a ton with that. I have a Dragon Highflow, I'm very interested to hear peoples results with different hotend configs. This very closely mimics the characteristics of the 1.5 Sideswipe probe mount as far as assembling goes, so just follow all of the guides for that and use this print instead of the original if you'd like. I recommend putting a small dab of glue on the magnets off to the side. They fell off for me even using the original part. Now for the fun stuff, this will use everything the original Sideswipe requires in terms of hardware, it just replaces the probe mount print. You will have to lower your servo assembly, and adjust your printer.cfg. I've attached my printer.cfg for you to reference. It should work, but know that you may need to tweak settings as every printer likes to have it's own personality sometimes. The last change I recommend making is setting your slicer to heat the bed, then auto bed level, and finally heating the nozzle after the bed level completes, you may get errors in klipper while probing. Watch the video above for details.