voron-0 LED strip

prusaprinters

<h3><strong>Step</strong></h3><ol><li>print STL files</li><li>use the soldering iron to connect 2 RBG boards</li><li>use the soldering iron to weld wires on the RGB board and build a 3in xh2.54mm Male connector</li><li>extent of one wire from the `out` port of the lift RGB board</li><li>use M3x6 BHCS to fix RGB boards on the holder</li><li>lead the light cable from the `umbilical board` by a 4pin xh2.54mm Male connector with a 3pin xh2.54mm Female connector</li><li>connect the RGB boards by xh2.54mm connector. (PS, the `out` port wire on the left RGB board needs to be plugged into the 4pin xh2.54mm Male connector)</li><li>connect to the motherboard and check all the wire sequences of xh2.54mm connectors</li></ol><p>&nbsp;</p><h3><strong>Bom</strong></h3><ol><li>v0-Umbilical x1</li><li>M3x6 BHCS x8-12</li><li>NeoPixel 8 x WS2812 5050 RGB LED x4</li><li>xh2.54mm connector Male&amp;Female 3pin (option) x2</li><li>xh2.54mm connector Male 4pin x2</li><li>xh2.54mm pitch female pin x13</li><li>magnet 4mmx3mm x10</li></ol><h3><strong>Tools</strong></h3><ol><li>Soldering Iron</li><li>Crimpers Pliers</li><li>Wires Cables</li></ol><p>https://github.com/mmusic/mm_3dprint/tree/main/design/voron-0%20LED%20strip</p>